Ceramic and Porcelain Products Maintenance Guide
1 It is essential for all floors that you install a large mat at all outside entrances.
2 Always make sure that all floors are regularly brushed.
3 Wash all areas with Easycare.
4 Excess grout and water staining can be removed with KF Cement Residue Cleaner, unless the tiles have a polished, metallic glaze or specially applied finish, then use MN Power Clean. If in doubt, contact the office on 020 8993 5545
5 Stubborn dirt, oil and grease can be removed with FZ Intensive Cleaner.
** ALWAYS ADHERE TO MANUFACTURERS INSTRUCTIONS WHEN USING ANY TILES OR TILING PRODUCTS**
Natural Products Maintenance Guide
1 It is essential for natural floors that you install a large mat at all outside entrances.
2 Always make sure that all floors are regularly brushed.
3 Wash all areas with Easycare.
4 Do not use strong bleach, acid, Flash, Mr Muscle or any other abrasive cleaners.
5 Deep cleaning can be carried out by using MN Wexa if required.
6 Excess grout and water staining can be removed with MN Power Clean.
7 Deep staining can be removed with Stainaway.
8 If a waxed finish is required one should mop on to the surface 2 coats of MN Caresheen diluted 1:5 in water , let dry for 30 mins than buff up. Then maintain with Caresheen instead of Easycare.
** ALWAYS ADHERE TO MANUFACTURERS INSTRUCTIONS WHEN USING ANY TILES OR TILING PRODUCTS**
A LIST OF RECOMMENDED TILERS IS AVAILABLE ON PURCHASE.